manualshive.com logo in svg

Multitech MultiModem MT2834ZPW, Owner'S Manual

Share
Download
Multitech MultiModem MT2834ZPW Owner'S Manual Download Page 66

MT2834ZPW Owner’s Manual

66

About CompuServe

In addition to the BBS, Multi-Tech provides support through
CompuServe’s Modem Vendor Forum (GO MODEMVEN) under GO
MULTITECH. You can also download manuals, Help files, drivers,
Microsoft Mail scripts, and product tips and descriptions from the
forum’s Multi-Tech library. Refer to your CompuServe documentation
for special operating procedures.

About the Internet

Multi-Tech is a commercial provider on the Internet, and we retrieve e-
mail messages from the following mailboxes on a periodic basis:

[email protected]

Marketing Dept.

[email protected]

Sales Dept.

[email protected]

International Marketing & Sales

[email protected]

Publications Dept.

If you wish to recievie technical support via the internet, you can send
an e-mail to Tech Support at the following address:

http://www.multitech.com/_forms/email_tech_support.htm

Multi-Tech's presence includes a Web site at:

http://www.multitech.com

and an ftp site at:

ftp://ftp.multitech.com

Summary of Contents for MultiModem MT2834ZPW































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands