Multitech MultiModem MT2834ZPW, Owner'S Manual

Page: 21 / 94

Chapter 3 - Testing Your Installation
21
6. Exit the System Properties sheet.
7. In Control Panel, double-click on the Modems icon.
8. When the Modems Properties sheet appears, click on the
Diagnostics tab. A list of ports and the devices installed on them
appears.
9. Click on the COM port the Multi-Tech MT2834ZPW is installed on,
then click on the More Info button to make sure Windows 95 can
communicate with the modem. Clicking on the More Info button
causes Windows 95 to send commands to and read responses
from the modem, and to display information about the modem’s
COM port.
10. Write down the modem’s port, interrupt, address, and highest
speed. You will need this information to set up any “legacy” (non-
Windows 95) communications software you install.
Port: COM__ Interrupt:____ Address:_______ Speed:_______
11. Click on the General tab. Select the Multi-Tech MT2834ZPW and
click on the Properties button to review the modem’s default
communications settings. Do not change any settings unless you
have special requirements.
12. Click on the Dialing Properties button and review your dialing
settings. If you must dial
9 to get an outside line, type 9 in the local
and long distance boxes. If you have call waiting service, disable it
to prevent it from interrupting a data or fax transmission.
13. Exit the Modems Properties sheet.