Multitech MultiModem MT2834ZPW, Owner'S Manual

Page: 14 / 94

MT2834ZPW Owner’s Manual
14
Step 1: Install the MT2834ZPW into the
Computer
Warning: For qualified service personnel only.
Installation of the MT2834ZPW requires you to open your computer.
Please consult the computer manual in addition to the following
instructions:
1. Turn off the computer and unplug it. Failure to do so may result in
damage to both the MT2834ZPW and the computer.
Do not turn
the computer on until the instructions tell you to do so.
2. Remove the cover from the computer as instructed in the computer
manual.
3. Select an empty 16-bit half- or full-size ISA expansion slot. Remove
the expansion slot cover and save the retaining screw.
4. Before handling the MT2834ZPW, discharge any static in your body
by touching a piece of grounded metal such as a water faucet.
Carefully remove the MT2834ZPW from its anti-static bag, handling
it only by the mounting bracket and edges. Do not touch the gold-
plated connectors along the bottom edge.
5. Placing the MT2834ZPW directly above the expansion slot, gently
but firmly push it into the connector until the card’s retaining
bracket is flush against the computer chassis.
6. With the screw you saved in step 3, fasten the retaining bracket to
the computer chassis.
7. Replace the cover of the computer.