Multitech MultiModem MT2834ZPW, Owner'S Manual

Page: 43 / 94

Chapter 5 - Controlling Your Modem
43
Command: \T n Inactivity Timer
Values:
n = 0
Default: 0
Description: \T0 Inactivity timer disabled.
\T1 Not supported—responds ERROR.
Command: \V n Protocol Result Code
Values: n = 0 or 1
Default: 1
Description: \V0 Disable protocol result code appended to DCE speed.
\V1 Enable protocol result code appended to DCE speed.
Command: \X
n
XON/XOFF Pass-Through
Values: n = 0 or 1
Defaults: 0
Description: \X0 Respond to and discard XON/XOFF characters.
\X1 Not supported—responds ERROR.
Command: -C n Data Calling Tone
Values:
n = 0 or 1
Defaults: 0
Description: -C0 Disable V.25 data calling tone.
-C1 Enable V.25 data calling tone.
Command: %B View Numbers in Blacklist
Values: n/a
Description: If blacklisting is in effect, this command displays the
numbers for which the last call attempted in the previous
two hours failed. In countries that do not require blacklist-
ing, the ERROR result code appears.
Command: %C n Data Compression Control
Values:
n = 0 or 1
Default: 1
Description: %C0 Disable V.42bis/MNP 5 data compression.
%C1 Enable V.42bis/MNP 5 data compression.