![background image](http://html1.mh-extra.com/html/multiquip/globug-gbx24b/globug-gbx24b_operation-manual_1855134025.webp)
GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 25
SETUP
Rotating and Tilting the Lamps
1. Hold the arms of the individual lamp and rotate it to
the desired direction (Figure 12). It is not necessary
to loosen the nut to turn the lamps.
Figure 12. Rotating a Lamp
2. To tilt the lamp to a desired angle, hold the individual
lamp and tilt (Figure 13).
Figure 13. Tilting a Lamp
Tilting the Lamp Stand
ARM
LAMP
CAUTION
When tilting the lamp, keep fingers clear of the pinch
points to prevent injury.
NOTICE
The generator does not need to be running in order to
operate the actuator switch and the control panel light.
Turning the ignition key switch to the ON position will
activate these functions.
1. GBX24B Only:
a. Unfasten the belt buckle on the protective cover.
b. Remove and fold protective cover into itself at the
top of the balloon and zip the cover (Figure 14).
Figure 14. Removing the Protective Cover
2. Turn the actuator switch on the control panel (Figure 15)
counterclockwise t to tilt the lamp stand up.
Figure 15. Actuator Switch
ACTUATOR
SWITCH
Summary of Contents for GLOBUG GBX24B
Page 58: ...PAGE 58 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 BLOCK DIAGRAM...
Page 59: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 59 AC WIRING DIAGRAM...
Page 60: ...PAGE 60 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 DC WIRING DIAGRAM...
Page 67: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 67 NOTES...