![background image](http://html1.mh-extra.com/html/multiquip/globug-gbx24b/globug-gbx24b_operation-manual_1855134011.webp)
GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 11
SAFETY INFORMATION
ELECTRICAL SAFETY
DANGER
The electrical voltage required to operate the generator
can cause severe injury or even death through physical
contact with live circuits. Turn generator and all circuit
breakers
OFF before performing maintenance on the
generator.
NEVER insert any objects into the output
receptacles during operation. This is
extremely dangerous. The possibility exists
of
electrical shock, electrocution or
death.
NEVER operate light tower
or handle any electrical
equipment while standing in
water, while barefoot, while
hands are wet or in the rain.
A dangerous
electrical
shock could occur, causing
severe bodily harm or
even death.
ALWAYS make sure the
area above the light tower is
open and clear of overhead
power lines and other
obstructions. The tower
extends in excess of 30
feet (9 meters). Contact
with overhead power
lines or other obstructions
could result in equipment
damage,
electrical shock,
electrocution and even
death.
Similar to boom equipment
, light tower may become
energized with high voltage.
DO NOT operate the light
tower within a radial distance of 17 feet (5.1 meters)
from high voltage power lines. If light tower becomes
energized with high voltage, contact with the equipment
could result in electrocution.
NEVER operate GBX24S light tower in winds in excess
of
45 MPH.
NEVER operate GBX24B light tower in winds in excess
of
34 MPH.
GBX
GBX
Backfeed to a utility system can cause
electrocution
and/or property damage.
NEVER connect the generator
to a building’s electrical system without a transfer switch
or other approved device. All installations should be
performed by a
licensed electrician in
accordance with all applicable laws and
electrical codes. Failure to do so could
result in electrical shock or burn,
causing
serious injury or even death.
Power Cord/Cable Safety
DANGER
NEVER let power cords or cables lay in water.
NEVER use damaged or worn cables or cords when
connecting equipment to generator. Inspect for cuts in
the insulation.
NEVER grab or touch a live power
cord or cable with wet hands. The
possibility exists of
electrical shock,
electrocution or death.
Make sure power cables are securely connected.
Incorrect connections may cause electrical shock and
damage to the light tower.
Grounding Safety
DANGER
The light tower is equipped with a ground terminal for
your protection.
ALWAYS complete the grounding path
from the light tower to an extrnal grounding source.
ALWAYS make sure that electrical circuits are properly
grounded to a suitable earth ground (ground rod) per
the National Electrical Code (NEC) and local codes
before operating generator.
Severe injury or death by
electrocution can result from operating an ungrounded
generator.
NEVER use gas piping as an electrical ground.
Summary of Contents for GLOBUG GBX24B
Page 58: ...PAGE 58 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 BLOCK DIAGRAM...
Page 59: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 59 AC WIRING DIAGRAM...
Page 60: ...PAGE 60 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 DC WIRING DIAGRAM...
Page 67: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 67 NOTES...