GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 29
STORAGE
PREPARATION FOR STORAGE
1. Place the lamp switch on the control panel to the off
position to turn the lamps off.
2. Turn the ignition switch to the OFF position to shut
down the engine.
3. Unscrew the mast locking knob to release the mast
for rotation.
4. Rotate the mast to the original stow position.
5. Tighten the mast locking knob to secure the mast.
6. Turn the actuator switch to the left and hold until the
lampstand is completely lowered.
7. Turn the winch handle counterclockwise until the mast
is completely lowered.
BALLOON STORAGE
1. Unzip the cover pocket at the top of the balloon. Take
out the cover and fold the balloon with it (Figure 23).
Figure 23. Unzipping Balloon Cover
2. Cover the balloon and lampstand. Zip up the cover and
fasten the 4 buckles (Figure 24).
Figure 24. Zipping Balloon Cover
BALLOON
BALLOON
COVER
BUCKLE
BUCKLE
ZIPPER
LIGHT TOWER STORAGE
1. Wipe dirt or foreign matter that may have accumulated
on the light tower during operation. Use a mild detergent
to clean the unit.
DO NOT spray the engine with water.
2. Avoid storing the light tower in areas that can be
exposed to rain, harsh elements, and high humidity.
3. Place the light tower in a clean dry location away from
dirt and debris.
Summary of Contents for GLOBUG GBX24B
Page 58: ...PAGE 58 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 BLOCK DIAGRAM...
Page 59: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 59 AC WIRING DIAGRAM...
Page 60: ...PAGE 60 GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 DC WIRING DIAGRAM...
Page 67: ...GBX24S GBX24B LIGHTTOWER OPERATION AND PARTS MANUAL REV 0 05 30 19 PAGE 67 NOTES...