MULTIQUIP GLOBUG GBX24B, Operation Manual, Page: 43 / 68

GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 43
TROUBLESHOOTING
Table 16. Fuse Troubleshooting
FUSE REASON FOR TURNING OFF CAUSE
Fuse 1
Starter does not perform properly.
Everything works properly except for starter.
No errors indicated.
Problems on the ECU or other things
related to the starter.
Fuse 2
Engine is not started in cold environments (glow heater
does not perform).
Glow lamp is not lit.
Problems on the ECU or the other
things related to the glow lamp.
Fuse 3 The start failure or the glow trouble occurs sometimes. Problems on the ECU or around it.
Fuse 4 Motor winch for the mast does not perform properly.
Problems on the motor winch on the
mast or the wirings to it.
Fuse 5
Non-reactive after the key switch turns to ON and preheat.
Starter performs properly, but engine is not started.
Fuel pump does not work (under the normal condition,
there will be the pump noise when turning the ignition key
switch to ON).
Problems on fuel pump. fuel sensor,
fuel meter, the lampstand actuator,
panel lamp, glow lamp, alternator or
wirings to these components.
Fuse 6
Engine is not started in cold environments (glow heater
does not perform).
Glow lamp is ON.
Problems on the glow heater, wirings
to the glow heater or around it.
PAL Fuse (50 A)
Engine is not started.
Nothing happens even when key switch is turned.
Actuator on lampstand does not work properly.
Lamps such as tail lamps work properly.
Problems related to DC12V (battery
connection) or wirings to these
components.