MULTIQUIP GLOBUG GBX24B, Operation Manual, Page: 35 / 68

GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 35
MAINTENANCE
Figure 28. Light Tower Maintenance
BOTTOM OF LIGHT TOWER
Table 9. Light Tower Maintenance
Location Part Symptom Solution Freq.
Light
Tower
T1 Jack
Does not operate smoothly? Lock pin is
loose?
Apply grease or
replace.
v
T2 Outrigger
Does not operate smoothly? Lock pin is
loose?
Replace.
v
T3 Axle Components Torsion spring not working properly? Replace.
l
T4 Cover Gas Spring Cover too heavy to be opened? Repair as needed
v
T5 Lifting Eye Loose? Tighten properly.
v
T6 Tire
Damaged?
(Tire pressure - 50 psi, 344.7 kPa)
Replace.
v
T7 Tongue Coupler and Chains Damaged? Replace.
l
T8 Gas Spring Gas Leak? Repair.
l
T9 Oil Containment Oil is Contained? Drain.
v
T10 Tow Bar Joint Pin, bolt, or nut damaged or loose?
Repair or replace as
needed.
v
T11 All Nuts and Bolts Damaged or Loosened?
Tighten properly,
replace
v
v
- Daily Check
n
- Every 20 Hours
l
- Every 100 hours
s
- Every 500 hours