manualshive.com logo in svg

MULTILIFT Ultima S Flex, User And Maintenance Manual

Share
Download
MULTILIFT Ultima S Flex User And Maintenance Manual Download Page 95

95

Ultima S / SL Flex & Pro

3/2019 

Hooklift Multilift Ultima S / SL Flex & Pro

User Manual

114060421

>>>

!

Fast lowering option of the tipping device

You can use the fast container lowering feature to lower the container faster than normal 

speed. The speed of the fast lowering is affected by the weight of the empty container and 

the temperature of the oil; at cold temperatures the speed decreases. 

The fast lowering option of the tipping device is primarily designed for lowering an empty 

or lightly loaded container. 

A fully loaded container must be lowered with the normal 

lowering function.

2GCC: The fast container lowering feature is switched on by pressing the fast lowering 

switch and moving the control lever forward.

2GMR ja 2GRC: The fast container lowering feature is switched on by pressing the fast 

lowering switch and then the “lower body” switch.

The switches and the lever must be kept in this position throughout the lowering process. 

The container will then freely lower down to a predetermined angle, after which the lowering 

process will continue at the normal speed. With large tipping angles, the fast lowering speed 

can be adjusted via the position of the control lever (2GCC), but with small tipping angles 

the control system determines the speed.

The lowering of the container can be interrupted by freeing the switches. The control lever 

must be released to the middle position smoothly (not abruptly) (2GCC). If the fast lowering 

switch is released, the main cylinder drive will switch to normal lowering.

 NOTE!

 

•  

Before starting fast lowering make sure 

   - 

that no-one or nothing is under the container.

 

• 

Do not exit the cockpit during the lowering process.

 

• 

If the vehicle is moving while the container is being lowered in fast 

 

 

speed mode,

  

- note the height of the hooklift device / container in relation to the surrounding

 

      bridges, tunnels and overhead power lines.

 

Drive carefully and cautiously. 

 

A rear-heavy container, slanted ground and/or cold oil may prevent the fast 

 

lowering option from being activated. 

Summary of Contents for Ultima S Flex





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands