13
Ultima S / SL Flex & Pro
3/2019
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
114060421
>>>
Safety during use - general
The driver must be familiar with the contents of this manual and should strictly follow the
directions and instructions. He must see to it that his Ultima hooklift equipment is technically
in perfect condition. Control of the suspension, condition of the tyres, tyre pressures,
condition of the container and loading of it, are all his responsibility. The driver must handle
the Ultima equipment with care. For example during loading and unloading the front wheels
of the truck must not be lifted up from the ground.
Ultima hooklift equipment may only be used when sitting on the driver´s seat.
If it is necessary to leave the cabin during loading, unloading or tipping,
always engage the parking brake and disengage the power take-off.
In the vicinity of the control units there must be no obstacles or loose objects that might
accidentally activate unit´s functions.
If the equipment has not been used for two weeks or longer, all safety functions must be
checked before the equipment is used again.
Avoid the unnecessary use of the main pressure relief valve. Heating up of the oil reduces
the quality of it and results in shorter life span of retaining rings and gaskets.
In subzero temperatures <32°F (< 0°C) it is recommended to let the pump idle for around
1 minute in order for the hydraulic oil to be warmed up
During the use of the equipment the engine noise will increase due to additional loading.
Noise level will also increase if the container is pulled along the ground during loading or
unloading of it.
When the equipment is used carefully and in a sensibly planned manner, the noise level
can be kept lower.
The hook equipment control system includes several functions assisting the
operator, but it is the operator who is always responsible for the proper and
safe use of the equipment.
Summary of Contents for Ultima S Flex
Page 194: ......
