11
Configuring external devices
Configuring an agitator
58
V2.20161017
30252060-02-EN
7.
Press the
key to activate the selection field
if the agitator has a PWM actuator.
A PWM actuator can be used to regulate the speed of the agitator.
OR
Continue with step 14 if the agitator has an on/off valve.
⇨
If the agitator has a PWM actuator and you have activated the selection field, the screen
changes:
8.
Press
or
to set the PWM frequency. You will find the correct PWM frequency in
the technical specifications for the agitator. In this case, the PWM frequency is 500Hz.
9.
Select the relevant percentage to change the maximum or minimum agitator speed.
10.
Press this key:
⇨
The data input screen appears.
11.
Enter the percentage required.
12.
Press this key:
13.
Repeat steps 9 to 12 for the other percentage.
14.
Press the
key to save the settings.
⇨
TANK-Control II switches off.
15.
Restart TANK-Control II to use the new settings.
www.ROLTRONIK.pl
Summary of Contents for TANK-Control II
Page 65: ...w w w R O L T R O N I K p l...
Page 66: ...w w w R O L T R O N I K p l...
