9
"Tank Control II" menu - Filling and operation
Filling the tank
42
V2.20161017
30252060-02-EN
Function icon
Meaning
Set maximum fill.
Set filling up to fill limit 2
Set filling up to fill limit 1
Set the part tank volume required for the remaining area as a fill limit.
Calculate the volume of spray required before doing this.
1.
Open the "Tank Control II" menu.
2.
Press
if you are using one tank.
OR
Press
or
if you are using two tanks.
⇨
The following screen will appear:
3.
Select the fill level you want to define.
– fill level 1 or
– fill level 2.
4.
Press this key:
⇨
The data input screen appears.
5.
Set the fill level for the fill limit selected.
6.
Press this key:
7.
Repeat steps 3 to 6 for the other fill level. If you are just using one product, set the maximum fill
level for fill level 2.
⇨
You have defined the fill levels.
8.
Press the function key with the fill limit to which you want to fill the tank. If you want to set the
part tank volume required for the remaining area as a fill limit, you need to switch to the
calculation screen.
⇨
The volume to be added to the tank, shown in the lower area of the screen, changes:
Procedure
www.ROLTRONIK.pl
Summary of Contents for TANK-Control II
Page 65: ...w w w R O L T R O N I K p l...
Page 66: ...w w w R O L T R O N I K p l...
