4
Installation instructions
Safety during installation
12
V2.20161017
30252060-02-EN
Installation instructions
Safety during installation
This chapter is intended for specialists and agricultural machinery manufacturers who install the
sensor and control unit.
▪ Please read these installation instructions carefully and follow all the instructions.
▪ Do not install the product unless you know how to install it on agricultural machines.
▪ Only install the sensor when the tank is new.
▪ Take safety measures to ensure that you do not fall if you climb onto the tank while installing the
sensor.
▪ If you climb into the tank, ensure that a second person is watching you and can help you in an
emergency.
System requirements
Software version 6.4 at least must be installed on the job computer for the field sprayer.
Installing the sensor
To install the sensor, you will need carry out the following steps independently of one another:
Step 1: Drill holes into the tank
Step 2: Install the tube socket
Step 3: Prepare the sensor tube
Step 4: Install the sensor tube
Before installation
Check that you have all the parts:
Number Part
Number Part
1
Float
8
Washer A8.4 (large)
1
Flange 140
4
Washer A8.4
1
Viton gasket 140
1
Tube socket
4
Viton gasket 25x8x3
2
Viton gasket 25x6
4
Hexagonal screw M8x35
1
Nut M6 (self-locking)
4
Nut M8
1
Washer 24.2x12.2
4
Nut M8 flat
1
Washer A6.4
8
Spring washer B8
1
Locking ring
4
4.1
4.2
4.3
www.ROLTRONIK.pl
Summary of Contents for TANK-Control II
Page 65: ...w w w R O L T R O N I K p l...
Page 66: ...w w w R O L T R O N I K p l...
