Muller Elektronik TANK-Control II, Installation And Operating Instructions Manual

Page: 5 / 66

For your safety
Basic safety instructions
1
30252060-02-EN V2.20161017 5
For your safety
Basic safety instructions
Please read the following safety instructions carefully before using the product for the first time.
▪ Please read these Installation and Operating Instructions carefully and follow all the safety
instructions.
▪ Keep children away from the control unit and sensor.
▪ Do not make any unauthorized modifications to the product. Unauthorized modifications or use
may impair safety and reduce the service life or operability of the unit. Modifications are
considered unauthorized if they are not described in the product documentation.
▪ Never remove any safety mechanisms or stickers from the product.
▪ Before performing any welding operations on the tractor or a trailed machine, always disconnect
the power supply to the terminal.
Intended use
TANK-Control II is intended exclusively for use in agriculture.
Intended use also means operating and maintaining the device in accordance with the manufacturer's
specifications.
The manufacturer shall not be held responsible for any installation or use that goes beyond this.
The manufacturer cannot be held liable for any personal injury or property damage resulting from
such improper use. All risks associated with improper usage must be borne entirely by the user. Any
unauthorized modifications made to the equipment will void the manufacturer's warranty.
Layout and meaning of warnings
All safety instructions found in these Operating Instructions are composed in accordance with the
following pattern:
WARNING
This signal word identifies medium-risk hazards, which could potentially cause death or serious
physical injury, if not avoided.
CAUTION
This signal word identifies low-risk hazards, which could potentially cause minor or moderate
physical injury or damage to property, if not avoided.
1
1.1
1.2
1.3
www.ROLTRONIK.pl