952.5-0000010 OM
147
Table 5.2 finished
Periodicity, h
Opera-
tion No
Operation description
8-10 125 250 500 1000 2000
63 Change grease in steering joints and rinse the
steering joints components
X
64 Check/adjust pneumatic pressure regulator
X
65 Check/tighten the cylinder head attaching bolts
X
66 Replace filter cartridge of coarse fuel filter
X
67 Check/ retorque of tractor external threaded
joints
X
68 Wash the engine cooling system and replace
the coolant in the engine cooling system
X
69 Replace filter cartridge of fine fuel filter
Every 600 hours of operation or
once in a year
70
1)
Replace filter-drier of the air-conditioning system Every 800 hours of operation or
once in a year
71 Perform complex servicing of “COMMON RAIL”
system
Every 3000 hours of operation or
once in a year
72 Adjust oil pressure in the engine lubrication sys-
tem
In case of abnormity of oil pres-
sure value in engine
73 Carry out maintenance of engine air cleaner
As it becomes dirty
_____________________________________________________________________________
___________________________________________________________________
1) The operation is performed when the tractor is equipped with air conditioner instead of fan-
heater.
2) The operation is performed when the tractor RLL is equipped with lower links with gripper
tools.
3) Operation shall be carried out once during the first maintenance on a shift basis (in every 8-10
hours), which is carried out by the customer and hereinafter in 125 hours of tractor operation.
4) Control and bringing to the internal pressure norm in the tractor tires is carried out each time
when one mode of the tractor operation is changed in another operation mode, and when the implements
and tools coupled with the tractor are replaced.
5) The operation is performed on tractors with FDA with planetary cylindrical wheel-hub drives
(822-2300020-02/04, basic configuration).
6) The operation is performed when the tractor against order is equipped with FDA with taper
wheel hub drives (72-2300020-
А
-04).
7) AB inspection and maintenance shall be carried out once per 3 months and not less.
8) The operation is performed on tractors with hydraulic lift (basic configuration).
9) The operation is performed when the tractor is equipped with brakes operating in oil sump,
against order.
10) The operation is performed on tractors optional equipped with draft control unit.
11) First and second change is carried out in 500 hours of tractor operation. Then the change
shall be carried out in every 1000 hours of operation simultaneously with oil change.
12) If screw lifting rods are installed against order the operation is not performed.
On tractors with mounted mechanical creeper of hydraulic creeper in addition to the above
mentioned in Table 5.2. operations it is necessary after each 250 hours of operation perform
the following operations:
- check oil level in transmission, if necessary refill;
- wash oil intake;
- check if there is no oil leaks through sealings, if necessary, eliminate;
- check tightening of threaded joints for fastening of MCR or HCR to the tractor.
