952.5-0000010 OM
23
It is possible to activate and deactivate the accumulator battery by means of the ac-
cumulator battery manual switch 2 (figure 2.2.3) located in the area of the accumulator bat-
tery installation. To activate and deactivate the accumulator battery it is necessary to press
the button 1.
1 – button; 2 – AB manual disconnect switch; 3 – accumulator battery.
Figure 2.2.3 – Installation of the accumulator battery manual disconnect switch
2.3 Upper shield unit of button switches and rear wiper switch
Pressing the switch button 1 ((Figure 2.3.1) turns on the windscreen wiper.
The switch has got three positions:
“Off”;
“On with low speed”;
“On with high speed”.
Pressing the switch button 2 (Figure 2.3.1) turns on air ventilation in the cab.
The switch has three positions:
“Off”;
“On in the mode of low feed of air”;
“On in the mode of large feed of air”.
More detailed information on controlling the heater fan is given below.
Pressing the switch button 3 (Figure 2.3.1) turns two rear working lights on as well
as the light indicator, built into the button.
Pressing the switch button 4 (Figure 2.3.1) turns two front working lights on the cab
roof on as well as the light indicator, built into the button.
1 – windscreen wiper switch; 2 – cab heater switch; 3 – rear working lights switch; 4 – switch of front
working lights on cab roof.
Figure 2.3.1 – Upper shield unit of button switches
The rear window wiper is turned on and off with a switch 1 (Figure 2.3.2).
1 – switch; 2 – rear window wiper arm.
Figure 2.3.2 – Activation and deactivation of rear window wiper
