10.
Remove O-rings (2) and damper ring (3) from
injector (1).
11.
Clean all contact and sealing surfaces.
12.
If carbon residue is present, clean sealing
face on cylinder head and protective sleeve
with milling cutter.
13.
Cover all connections and bores, or seal with
suitable plugs.
Installing injector
Note:
Do not remove plug for HP line until directly
before assembly of the adapter.
1.
Prior to installation, remove plug.
2.
Coat injector with assembly paste at the seat
of the nozzle retaining nut.
Note:
A new sealing ring is included in the scope of
delivery of the injector.
3.
Insert new sealing ring (arrowed).
Note:
A new sealing ring is included in the scope of
delivery of the injector.
4.
Fit new O-rings (2) and damper ring (3) on in-
jector (1) and coat with assembly compound.
5.
Insert injector (1) together with hold-down
clamp into cylinder head, ensuring that the
high-pressure fuel line connection is aligned
correctly.
MS150109/01E 2015-11
| Task Description | 189
TIM-ID: 0000017169 - 002
