182 – AL CAN Wrong Parameters
ZKP-Number: 2.0500.682
Incorrect parameters on CAN
Yellow alarm; warning
Cause
Corrective action
Wrong parameter value entered in
data record.
u
Contact Service.
183 – AL CAN No PU-Data
ZKP-Number: 2.0500.683
CAN PU data not present or available
Yellow alarm; warning
Cause
Corrective action
The selected CAN mode initializes
communication by means of the
application environment data
module. A faulted occurred during
an attempt to copy a received
data module to the Engine Control
Unit.
1. Check devices connected to CAN.
2. Contact Service.
184 – AL CAN PU-Data Flash Error
ZKP-Number: 2.0500.684
CAN PU data flash error
Cause
Corrective action
A program fault occurred while
trying to copy a received PU data
module into the flash module.
u
Contact electronic Service.
186 – AL CAN1 Bus Off
ZKP-Number: 2.0500.686
CAN controller 1 is in “Bus-Off” status
Yellow alarm; automatic changeover to CAN 2
Cause
Corrective action
Short circuit, massive interference
or Baud rate incompatibility.
1. Check CAN bus for short circuit, rectify short circuit as necessary.
2. Check shielding, improve shielding as necessary.
3. Contact Service.
112 | Troubleshooting | MS150109/01E 2015-11
TIM-ID: 0000045495 - 002
