Installing injector
1.
Remove plug before installing the injec-
tor. (Do not remove the plug from the HP
line before installing the adapter).
2.
Coat injector with assembly paste at the
seat of the nozzle retaining nut.
3.
Fit new sealing ring (included in the scope
of delivery of the injector) with assembly
compound on injector, observe installation
position of sealing ring.
4.
Fit new O-rings (3) (included in the scope
of delivery of the injector), O-ring (2) and
damping ring (1) onto the injector and coat
with assembly compound (Kluthe Hakuform
30-11C/Emulgier).
5.
Remove oil carbon from sealing face on cyl-
inder head and protective sleeve with mill-
ing cutter.
6.
Insert injector into cylinder head, ensuring
that the HP line adapter is correctly
aligned.
7.
Press in injector with installation/removal
jig.
8.
Remove installation/removal jig.
156 | Task Description | MS150067/02E 2014-04
TIM-ID: 0000000925 - 012
Summary of Contents for 16 V 4000 M63L
Page 1: ...Operating Instructions Diesel engine 16 V 4000 M63L MS150067 02E...
Page 3: ...Commissioning Note...
Page 4: ......
