551 – SS Engine Overspeed Camshaft
ZKP-Number: 22.510.933
Limit value 2
Cause
Corrective action
Camshaft overspeed.
1. Acknowledge alarm.
2. Attempt engine restart.
555 – AL Call MTU Field Service
ZKP-Number: 20.555.001
Cause
Corrective action
This fault becomes active if a
maintenance case has been
processed by the ECU Field Data
Handling (FDH) feature that
results in a change of engine
parameters.
This fault remains active even
after switching off and back on
until a valid enabling code is
entered via the SAM display and
key controls. This enabling code
can be requested via the
Internet using a special
procedure.
u
Request activation code via Internet.
576 – AL ESCM Override
ZKP-Number: 1.1075.083
Engine overload
Yellow alarm; warning
Cause
Corrective action
Violation of corrected MCR or
DBR/MCR curve.
u
Reduce power.
577 – SD T-Lube Oil Pan
ZKP-Number: 1.0137.900
Signal error, oil pan temperature sensor
Yellow alarm; warning
Cause
Corrective action
Oil pan temperature sensor
faulty.
Short circuit or wire break.
u
Check sensor and cabling, replace as necessary (→ Page 239).
MS150067/02E 2014-04
| Troubleshooting | 131
TIM-ID: 0000045495 - 001
Summary of Contents for 16 V 4000 M63L
Page 1: ...Operating Instructions Diesel engine 16 V 4000 M63L MS150067 02E...
Page 3: ...Commissioning Note...
Page 4: ......
