8.
Press in injector with installation/removal jig.
9.
Remove installation/removal jig.
10.
Coat screw mating face (2) and thread with
engine oil.
11.
Fit hold-down clamp (1) in correct position, fit
screw (2) and tighten by hand.
Note:
Make sure parts are perfectly clean.
12.
Apply engine oil to thread, sealing taper and
thrust ring of adapter (3).
13.
Coat O-ring on adapter (3) with assembly
compound (Kluthe Hakuform 30-15).
14.
Install adapter (3).
15.
Use torque wrench to tighten screw (2) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm+10 Nm
16.
Use torque wrench to tighten adapter (3) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Adapter
Tightening torque
100 Nm+10 Nm
Note:
Make sure parts are perfectly clean.
17.
Coat thread and sealing cone of HP line (5) with engine oil.
18.
Coat O-rings with assembly compound (Kluthe Hakuform 30-15).
19.
Thread in HP line (5), ensuring that the sealing areas are not damage.
MS150047/05E 2018-08
| Injection Valve / Injector | 177
TIM-ID: 0000000925 - 031
Summary of Contents for 12V4000M93 series
Page 1: ...Operating Instructions Diesel engine 12V4000M93x 16V4000M93x MS150047 05E...
Page 3: ......
Page 4: ......
