Tightening torques for male connectors as per MTN 5183-3 standard
This standard applies to male unions to DIN 2353 Series L with threaded end to DIN 3852 Form A (sealed by
sealing ring to DIN 7603-Cu).
Tightening torques M
A
are given for male unions made of steel (St) with phosphatized surface coating and
oiled, or galvanized.
Threads and mating faces beneath heads must be coated with engine oil prior to assembly.
An assembly tolerance of +10% of the figures in the table is permitted due to unavoidable deviations during
the tightening process.
Thread
inserted in steel/gray cast iron M
A
(Nm)
M10 x 1
15
M12 x 1.5
20
M14 x 1.5
35
M16 x 1.5
50
M18 x 1.5
60
M22 x 1.5
70
M26 x 1.5
100
M32 x 2
160
M42 x 2
260
M48 x 2
320
M
A
= tightening torques
MS150047/05E 2018-08
| General Information | 27
TIM-ID: 0000002333 - 018
Summary of Contents for 12V4000M93 series
Page 1: ...Operating Instructions Diesel engine 12V4000M93x 16V4000M93x MS150047 05E...
Page 3: ......
Page 4: ......
