1.4520.520 – MIC5 Stat W: temperat. limit reached
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
The device temperature is too
high.
u
Ensure that the genset room is adequately ventilated.
1.4520.521 – MIC5 Stat W: pow output lim reached
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
Power output is too high.
1. Check ignition system settings in the engine governor.
2. Check ignition coils.
3. Check igniters.
1.4520.522 – MIC5 Stat W: invalid coil data
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
The ignitions system settings are
invalid.
1. Check ignition system settings in the engine governor.
2. Restart ignition control unit.
1.4520.523 – MIC5 Stat W: invalid configuration
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
The ignitions system settings are
invalid.
1. Check ignition system settings in the engine governor.
2. Restart ignition control unit.
1.4520.524 – MIC5 Stat W: invalid trigger config
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
The ignitions system settings are
invalid.
1. Check ignition system settings in the engine governor.
2. Restart ignition control unit.
1.4520.525 – MIC5 Stat W: conf data checksum err
Yellow alarm. Initiated by MIC5.
Cause
Corrective action
The ignitions system settings are
invalid.
1. Check ignition system settings in the engine governor.
2. Restart ignition control unit.
1.4520.526 – MIC5 Stat Analogue current sig fail
Red alarm. Initiated by MIC5.
Cause
Corrective action
Failure of the current signal to
adjust the ignition point.
u
Check settings in ignitions control unit.
MS150104/03E 2017-09
| Troubleshooting | 89
TIM-ID: 0000038611 - 005
