manualshive.com logo in svg

MTU 12V4000C*5 series, Operating Instructions Manual

Share
Download
MTU 12V4000C*5 series Operating Instructions Manual Download Page 73

5.5 Emission label – Check

Emission label – Check

Note:

If there are any irregularities, notify your MTU contact person/service partner without delay.

1.

Check that emission labels are present (there can be more than one).

2.

Check emission label for intactness.

3.

Check that emission label is fully legible.

4.

Check content of emission label:
• Does the label on the engine match the label document in the Business Portal/Equipment?
• Does the engine number on the emission label match the engine identification plate?
• Does the Manufacturing Date match the year of manufacture on the identification plate?

MS15041/03E 2018-08

| Operation | 71

TIM-ID: 0000063752 - 002

Summary of Contents for 12V4000C*5 series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands