manualshive.com logo in svg

MTU 12V4000C*5 series, Operating Instructions Manual

Share
Download
MTU 12V4000C*5 series Operating Instructions Manual Download Page 181

7.

Install installation/removal jig (2) on cylinder
head.

8.

Remove injector (1) and hold-down clamp
with installation/removal jig (2).

9.

Remove installation/removal jig (2).

10.

Clean all mating and sealing surfaces.

11.

If carbon residue is present, clean sealing
face on cylinder head and protective sleeve
with milling cutter.

12.

Seal old injector with plug and cap of new in-
jector.

13.

Cover all connections and bores, or seal with
suitable plugs.

Installing injector

Note:

Do not remove plug for HP line until directly
before assembly of the adapter.

1.

Prior to installation, remove plug.

2.

Coat injector with assembly paste at the seat
of the nozzle retaining nut.

Note:

A new sealing ring is included in the scope of
delivery of the injector.

3.

Insert new sealing ring (arrowed).

Note:

New O-rings and damping ring are included in
the scope of delivery of the injector and are
pre-assembled.

4.

Coat O-rings (2, 3) and damping ring on new
injector (1) with assembly compound.

5.

Insert injector (1) together with hold-down
clamp into cylinder head, ensuring that the
high-pressure fuel line connection is aligned
correctly.

MS15041/03E 2018-08

| Injector | 179

TIM-ID: 0000053873 - 004

Summary of Contents for 12V4000C*5 series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands