manualshive.com logo in svg

MTU 12V4000C*5 series, Operating Instructions Manual

Share
Download
MTU 12V4000C*5 series Operating Instructions Manual Download Page 133

1404 – AL Flap Byp A linkage failure

Cause

Corrective action

The range of rotation on homing
the bypass flap (M52) has violated
the limit. The flap mechanism is
faulty.

1. Check exhaust flap for damage (→ Page 192).
2. Replace the linkage rod if it is damaged (→ Page 192).
3. Contact Service on detecting any other damage at the exhaust

flap.

1406 – AL Flap Dispenser linkage failure

Cause

Corrective action

The range of rotation on homing
the dispenser flap (M55) has
violated the limit. The flap
mechanism is faulty.

1. Check exhaust flap for damage (→ Page 192).
2. Replace the linkage rod if it is damaged (→ Page 192).
3. Contact Service on detecting any other damage at the exhaust

flap.

1408 – AL Flap Egr A restricted Limit 1

Cause

Corrective action

The range of rotation on homing
the EGR shutoff flap (M53) has
violated limit 1. Flap travel is
marginally restricted.

1. Check smooth operation of the exhaust flap mechanism.
2. Contact Service.

1410 – AL Flap Byp A restricted Limit 1

Cause

Corrective action

The range of rotation on homing
the bypass flap (M52) has violated
limit 1. Flap travel is marginally
restricted.

1. Check smooth operation of the exhaust flap mechanism.
2. Contact Service.

1412 – AL Flap Disp restricted Limit 1

Cause

Corrective action

The range of rotation on homing
the dispenser flap (M55) has
violated limit 1. Flap travel is
marginally restricted.

1. Check smooth operation of the exhaust flap mechanism.
2. Contact Service.

1414 – AL Flap Egr A restricted Limit 2

Cause

Corrective action

The range of rotation on homing
the EGR shutoff flap (M53) has
violated limit 2. Flap travel is
restricted.

1. Check smooth operation of the exhaust flap mechanism.
2. Contact Service.

MS15041/03E 2018-08

| Troubleshooting | 131

TIM-ID: 0000065298 - 004

Summary of Contents for 12V4000C*5 series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands