6.14 Oil Filtration / Cooling
6.14.1 Engine oil filter ‒ Replacement
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Filter wrench
F30379104
Engine oil
Oil filter
(→ Spare Parts Catalog)
DANGER
Rotating and moving engine parts.
Risk of crushing, danger of parts of the body being caught or pulled in!
• Only run the engine at low power. Keep away from the engine's danger zone.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
• Wear ear protectors.
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
NOTICE
Damage to component!
Severe material damage!
• For filter replacement with the engine running, operate the engine at low engine load.
• The filter which is to be replaced must be cut out for a brief period only.
Engine oil filter ‒ Replacement
1.
Stop engine (→ Page 88) and disable en-
gine start.
2.
Unscrew oil filter using filter wrench.
3.
Clean sealing surface on connecting piece.
4.
Check condition of new oil filter sealing
ring and moisten it with oil.
5.
Screw on and tighten new oil filter by hand.
6.
Replace other oil filters in the same way.
7.
Turn engine with starting system after ev-
ery oil change and filter replacement
(→ Page 166).
8.
Check oil level (→ Page 213).
218 | Task Description | MS150069/02E 2014-03
TIM-ID: 0000014238 - 006
