OPERATING AND MAINTENANCE MANUAL
Operation and maintenance
MCCY - CY 013÷301
52
ENGLISH
EN
The data in this manual are not binding and they can be modified by the manufacturer without notice.
Reproduction of this manual is strictly prohibited.
C
HAPTER
9
O
PERATION
AND
MAINTENANCE
9 . 1
O p e r a t i o n
The machine operates in completely automatic mode.
There is not necessary to turn it off when there is no thermal load as it turns off automatically when the preset water outlet
temperature has been reached.
9 . 2
M a i n t e n a n c e
ATTENTION
Before proceeding with the installation or the maintenance of these units be sure that all personnel concerned have read
and understood the Chapter 2 “Safety“.
These machines will give many years of trouble-free service if they are properly maintained and serviced.
9.2.1
Unit access
You can remove the protection panels for the maintenance of the unit.
To remove the panels use a screw drive and unscrew the fixing screws.
Here below you can see the panel you can remove.
Units MCCY-CY 013÷020
•
to access the refrigerant circuit components remove the panel a
L
(B).
•
to access the electric board components set the main switch on “O” and remove the panel (C).
•
to access the water circuit components remove the panel (A) and (E).
•
to access the fan and the condenser remove the panel (D).
D
C
B
A
D
E
C
A
Summary of Contents for MCCY-CY013 301
Page 68: ......
