17
ModCon®75 Touch
HMI Panel Interface Connections
Ethernet
CAT-5e shielded cable with RJ45 connector
Micro SD
Standard micro SD
•
Disconnect system power before connecting or disconnecting any modules or devices.
•
Components in this system are electrostatic discharge sensitive (ESDS). Use proper
personal grounding procedures when removing, handling or adjusting the electronic
modules.
FAILURE TO FOLLOW THESE WARNINGS CAN RESULT IN SERIOUS PERSONAL
INJURY OR LOSS OF LIFE.
Specifications
Table 1. Specifications for ModCon75 HMI Panel
Power Supply
Input voltage
24VDC
Permissible range
20.4VDC to 28.8VDC
Maximum current
consumption
0.75A @ 24VDC
Display
LCD type
TFT
Backlight type
White LED
Luminous intensity
(brightness)
Typically, 400 nits (cd/m2), at 25°C
Backlight longevity
50k hours
Note:
Panel’s longevity is the typical operating time after which the brightness drops to
50% of its original level.
Resolution (pixels)
800 x 480 (WVGA)
Size
7”
Viewing area
Height x Width (mm)
152.4 x 91.44
Color support
65,536 (16bit)
