26
ModCon®75 Touch
Chapter 5,
ModCon75 Touch I/O Module
•
The ModCon75 Touch HMI panel is delivered with one I/O Module. An
optional Remote Relay Module is also available and is described in
detail in Appendix B.
I/O Modules
•
I/O Modules provide a ModCon75 Touch Controller with an on-board
I/O configuration.
•
The I/O Module plugs directly into the back of the ModCon75 Touch
HMI panel, creating a self-contained control unit with a local I/O
configuration.
I/O Module Diagram
Figure 15. I/O Module
1
Din-rail clips
Provide physical support for CPU and I/O Module. There
are two clips: one at the top (shown), one at the bottom
(not shown).
2
Input I/Os
Input I/O connection points –
Not Supported, No
Customer Connection
3
4
I/O Bus-left
Left-side Connector
5
Bus Connector
Lock
Slide the Bus Connector Lock to the left to electrically
connect the I/O module to the CPU.
6
I/O Bus-Right
(Bus Connector
Cover)
Right-Side Connector shipped covered. Leave covered
when not in use.
