MSA AUER
MSA
Appendix
Control Unit Models 9010 LCD and 9020 LCD
57
GB
9010/20 LCD
Sensor data sheet TYPE 410
Part No.: 10000135 [Alu] M25
Part No.: 10000137 [St.St.] M20
Terminal Block
9010/9020
Sensor Type 410
Caution:
Before connecting the measuring head bridge current, check hardware
and software settings.
On the 9010/9020 LCD, the cable shield is applied on one side.
Sensor type:
Catalytic/passive/constant current supply [3 wire passive]
Connection data:
Bridge current:
270 mA/310 mA, for methane only
Maximum rated current:
350 mA
Maximum rated voltage:
3.0 V
Power requirement:
1.0 W [excluding cable lengths]
Connection cable:
3-lead, 80 % shielded
Maximum loop resistance:
12 Ohm
Maximum cable length:
500 m [with 1.5 mm
2
lead cross-section]
Cable diameter:
8 – 13 mm
Permitted lead cross-section:
0.75 – 2.5 mm
2
Cable insertion:
M25 x 1.5 / M20 x 1.5
Conditions for
use:
Assembly:
Wall-mounted
Protection:
IP 54/EN 60529
Explosion protection:
Ex II 2G EEx d IIC T6
Approval:
Basefa 04ATEX0117X
Temperature:
-20 °C to +60 °C
Humidity:
5 – 95% rel. humidity; non-condensing
Pressure:
950 – 1,100 hPa
Weight:
approx. 1.24 kg
Dimensions W x D x H:
120 mm x 72 mm x 140 mm
Housing material:
Cast aluminium [polyester-coated]
Summary of Contents for 9010 LCD
