MSA 9010 LCD, Operating Manual

Page: 61 / 99

MSA AUER
MSA Appendix
Control Unit Models 9010 LCD and 9020 LCD 61
GB
9010/20 LCD Sensor data sheet D-7711 K-PR Part No.: 10046889
Terminal Block
9010/9020
Sensor Type D-7711 K-PR
Caution: Before connecting the measuring head bridge current, check hardware
and software settings.
On the 9010/9020 LCD, the cable shield is applied on one side.
Sensor type:
Catalytic/passive/constant current supply [3 wire passive]
Connection data: Bridge current: 310 mA, for all measuring components
Maximum rated current: 300 mA
Power requirement: approx. 0,6 W [excluding cable lengths]
Connection cable: 3-lead, 80 % shielded
Maximum loop resistance: 36 Ohm
Maximum cable length: 1,000 m [with 1.5 mm
2
lead cross-section]
Cable diameter: 8.5 mm
Lead cross-section: 1.5 mm
2
Terminal box: EEx e [Part No.: D0715205]
Conditions for
use: Assembly: Wall-mounted
Protection: IP 42 [housing] to DIN 400 50
Explosion protection: Ex II 2G EEx d IIC T4

-40 °C

Ta

+100 °C
Approvals: PTB 01 ATEX 1152 X N1
Temperature: -20 °C to +55 °C [methane to +100 °C]
Humidity: 5–95% relative humidity; non-condensing
Atmospheric Pressure: 900 – 1,100 hPa
Weight: approx. 0.72 kg
Dimensions W x D x H: 50 mm x 40 mm x 50 mm
Housing material: Stainless Steel [DIN 1.4305, V2A]
Heat-up time:

60 s
Response time t90: Methane

10 s Hydrogen

10 s
Propane

14 s Acetone

18 s
Ethanol

20 s Hydrogen

25 s
Ethane

20 s