MS ENERGY c10, Instruction Manual

Page: 365 / 404

ENG
18
8. Riding mode
Display riding modes: T (Tour); S (Sport); C (Customized); E (Eco); T (Tour).
9. Unit Distance (km or mile)
10. Data & Info display
Display Distance, Riding time and other setting data
11. Error warning
12. Riding speed
When there is a need for maintenance the symbol SERVICE will be displayed (riding
distance or the number of battery charge cycles exceed the set value, function can be
deactivated).
Buton controller
ON/OFF button
Turn on the device, press and hold button for 3s to power on the display.
Press and hold again for 3s to power off the display, If the bike is not used, after 10
minutes the display will be automatically turned off.
Speed/Mileage display
Open display, display default shows real time speed,
total mileage.
Short press“
Switch ”button to switch display
information.
Shown in order:
Real time speed → Accumulative mileage → Average
speed → Single mileage → Max.speed → Single time →
Riding time.
Hold and press “ Headlight ” button in single time
mileage or single riding time display to clear single time
mileage and single riding time at the same time.
Up/Down button
Headlight button
On/Off & Switch
button
Walk Assist button