MS ENERGY c10, Instruction Manual

Page: 360 / 404

ENG
13
handlebar, adjust the hadlebar and the body of the bicycle to form an angle of
90degree, see the picture.
Some models have a light/power meter console that attaches to the handlebar.
Attach this with the plastic brackets and screws provided.
The adjustment of the wheel
After loose the wheel,
please adjust it according
to
the recommend
torque. The fasten torque
should be no less than
30Nm for the rear wheel.
The fasten torque of the
front wheel should be no
less than 25 Nm.
Adjust the Saddle
Your seat height is adjusted by a quick release or must be
tighten by Allen wrench key (options).
Pull the quick release lever or unscrew nut with Alen
Wrench key (option).
Insert your seat post to at least the minimum insertion
line marked on the post. Tighten the adjusting nut by
quick release lever, then push the quick release lever to
the closed position or tight the nut with Alen Wrench key
(option)., the suggested torque is no less than 19.5Nm.
The seat angle is adjusted with the nuts that attach the
seat to the seat rail. Ensure that the nuts are tightened
firmly and that the seat does not move forward or back
while you are sitting on it.
Adjusting nut
Closed
Closed
Open
Closed
MIN
MAX