MPC NetFRAME 1420 Technical Reference Manual Download

Page: 42 / 120

MPC Computers, LLC

NetFRAME 1420

Lifting Socket Lever

3. Locate Pin 1 on the CPU socket. (*Note: Pin 1 is the corner marked with a triangle).

Please note that the North Key and the South Key are located vertically in the CPU
housing.

4. Use your thumb and your index finger to hold the CPU at the North Center Edge and the

South Center Edge of the CPU.

5. Align Pin 1 of the CPU with Pin 1 of the socket. Once aligned, carefully lower the CPU

straight down and into the socket. Do not drop the CPU on the socket. Do not move the
CPU horizontally or vertically. Do not rub the CPU against the surface of the socket or
against any pins of the socket, which may damage the CPU and/or the socket.

Summary of Contents for NetFRAME 1420

























































































































Search results

Summary of Contents for NetFRAME 1420

Reviews:

Related manuals for NetFRAME 1420

Brands by name

Popular brands

MPC NetFRAME 1420, Technical Reference Manual

Search results

Summary of Contents for NetFRAME 1420

Reviews:

Related manuals for NetFRAME 1420

Brands by name

Popular brands