MPC Computers, LLC
NetFRAME 1420
74
Security
The
Security
menu is used to set passwords and security features.
Choose
Security
from the main menu with the Left/Right arrow keys and press [Enter].
Note: Depending on your system's configuration and BIOS revision, your system's
defaults may be different from the defaults in the table below. Also, certain values
or options shown in the table may not be present in your system's BIOS. This BIOS
section is for reference only.
Security Menu
Supervisor Password Is:
This displays whether a supervisor password has been entered for the system. Clear means such
a password has not been used and Set means a supervisor password has been entered for the
system.
User Password Is:
This displays whether a user password has been entered for the system. Clear means such a
password has not been used and Set means a user password has been entered for the system.
Set Supervisor Password
When the item "Set Supervisor Password" is highlighted, press the [Enter] key. When prompted,
type the Supervisor's password in the dialogue box to set or to change supervisor's password,
which allows access to BIOS.
Set User Password
When the item "Set User Password" is highlighted, press the [Enter] key. When prompted, type
the user's password in the dialogue box to set or to change the user's password, which allows
access to the system at boot-up.
Summary of Contents for NetFRAME 1420
Page 1: ...1 ...
Page 29: ...MPC Computers LLC NetFRAME 1420 Slide System into Rack ...
Page 92: ......