MPC NetFRAME 1420, Technical Reference Manual

Page: 10 / 120

MPC Computers, LLC NetFRAME 1420
10
The power supply cords must include a grounding plug and must be plugged into
grounded electrical outlets. Follow all the instructions and warnings marked on this
product or included in this manual.
MPC recommends storing and using this product on a surface or rack specifically
designed for that purpose. Do not use this product on an unstable surface. The product
might fall, causing serious damage.
Slots and openings in the server are provided for ventilation. To ensure the reliable
operation of your product and to protect it from overheating, these openings must not be
blocked or covered. Do not use this product on a sofa, rug, or other soft surface. This
product must never be placed near or over a radiator or heat register. This product must
not be placed in a built-in enclosure of any kind unless proper ventilation is provided.
Never push objects of any kind into the product through the cabinet openings. They may
touch dangerous voltage points or short out parts — possibly resulting in an electric
shock or a fire hazard.
Never spill liquid of any kind on the product.
This product must only be connected to the AC power source as indicated on the power
supply information label. If you are not sure of the type of AC power available, ask the
local power company. Only connect this product to a power outlet that matches the power
requirements of this product.
Do not allow anything to rest on the power cord. Do not place this product where people
might walk on the cord.
If you use an extension cord with this product, make sure that the total amperage rating
of all equipment plugged into it does not exceed the amperage rating of the extension
cord. Ensure that all the products plugged into the main AC power outlet do not exceed
15 amps.
Unplug the product from the main electrical AC power outlet before cleaning. Do not use
liquid or aerosol cleaning solvents directly on the product. Use a damp cloth for cleaning
the exterior surfaces.
Do not use this product near standing bodies of water or in humid environments.
Unplug this product from the main AC power outlet and call for service if any of the
following conditions occur:
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or corrosive liquids.
The product has been dropped, or the case has been damaged.
The product’s performance changes, indicating a need for service.
Warning: Do NOT open the power supply cover; hazardous voltages are
present. There are no user-serviceable components inside.
Warning: There is a danger of explosion if the onboard battery is installed
upside down, which would reverse its polarity. This battery must be
replaced only with the same or an equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Warning: This server may have come equipped with a CD-ROM drive. To
prevent direct exposure to the laser beam and hazardous radiation, do not
open the enclosure or use the unit in any unconventional way.