MPC Computers, LLC
NetFRAME 1420
76
Exit
The
Exit
menu is used to exit Setup, save changes, and load and save defaults.
Choose
Exit
from the main menu with the Left/Right arrow keys and press [Enter].
Note: Depending on your system's configuration and BIOS revision, your system's
defaults may be different from the defaults in the table below. Also, certain values
or options shown in the table may not be present in your system's BIOS. This BIOS
section is for reference only.
Exit Menu
Exit Saving Changes
Highlight this item and press [Enter] to save any changes you made and to exit the BIOS Setup
utility.
Exit Discarding Changes
Highlight this item and press [Enter] to exit the BIOS Setup utility without saving any changes
you may have made.
Load Setup Defaults
Highlight this item and press [Enter] to load the default settings for all items in the BIOS Setup.
These are the safest settings to use.
Discard Changes
Highlight this item and press [Enter] to discard (cancel) any changes you made. You will remain
in the Setup utility.
Save Changes
Highlight this item and press [Enter] to save any changes you made. You will remain in the Setup
utility.
Summary of Contents for NetFRAME 1420
Page 1: ...1 ...
Page 29: ...MPC Computers LLC NetFRAME 1420 Slide System into Rack ...
Page 92: ......