ioLogik E1200 Series
Introduction
1-6
Counter/Frequency:
250 Hz, power off storage
Digital Output
I/O Mode:
DO or Pulse Output
Pulse Wave Width/Frequency:
1 ms/500 Hz
Over-voltage Protection:
45 VDC
Over-current Protection:
2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown:
175°C (typical), 150°C (min.)
Current Rating:
200 mA per channel
Isolation:
3K VDC or 2K Vrms
Power Requirements
Power Consumption:
140 mA @ 24 VDC
MTBF
(meantime between failures)
Time:
502,210 hrs
Database:
Telcordia (Bellcore)
ioLogik E1260
RTD
Input Type:
PT50, PT100, PT200, PT500, PT1000;
Resistance of 10 ohms, 20 ohms, and 100 ohms
Sampling Rate:
12 samples/sec (all channels)
Resolution:
16 bits
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Input Impedance:
625K ohms
Power Requirements
Power Consumption:
110 mA @ 24 VDC
MTBF
(meantime between failures)
Time:
660,260 hrs
Database:
Telcordia (Bellcore)
ioLogik E1262
Thermocouple Input
Sensor Type:
J, K, T, E, R, S, B, N
Mili Volt Type:
±78.126 mV, ±39.062 mV, ±19.532 mV
Fault and Overvoltage protection:
±35 VDC (power off); +30 VDC, -25 VDC (power on)
Sampling Rate:
12 samples/sec (all channels)
Resolution:
16 bits
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Input Impedance:
10M ohms
Power Requirements
Power Consumption:
119 mA @ 24 VDC
MTBF
(meantime between failures)
Time:
631,418 hrs
Database:
Telcordia (Bellcore)
