Moxa Technologies ioLogik E1200 Series User Manual Download Page 6

Page: 6 / 69

ioLogik E1200 Series

Introduction

1-2

Product Model Information

Model

Description

ioLogik E1210

Remote Ethernet I/O with 2-port Ethernet switch and 16 DIs

ioLogik E1211

Remote Ethernet I/O with 2-port Ethernet switch and 16 DOs

ioLogik E1212

Remote Ethernet I/O with 2-port Ethernet switch, 8 DIs, and 8 DIOs

ioLogik E1214

Remote Ethernet I/O with 2-port Ethernet switch, 6 DIs, and 6 relays

ioLogik E1240

Remote Ethernet I/O with 2-port Ethernet switch and 8 AIs

ioLogik E1241

Remote Ethernet I/O with 2-port Ethernet switch and 4 AOs

ioLogik E1242

Remote Ethernet I/O with 2-port Ethernet switch and 4 AIs, 4DIs, and 4DIOs

ioLogik E1260

Remote Ethernet I/O with 2-port Ethernet switch and 6 RTDs

ioLogik E1262

Remote Ethernet I/O with 2-port Ethernet switch and 8 TCs

ioLogik E1210-T

Ethernet remote I/O with 2-port Ethernet switch and 16 DIs, -40 to 75°C operating
temperature

ioLogik E1211-T

Ethernet remote I/O with 2-port Ethernet switch and 16 DOs, -40 to 75°C operating
temperature

ioLogik E1212-T

Ethernet remote I/O with 2-port Ethernet switch, 8 DIs, and 8 DIOs, -40 to 75°C
operating temperature

ioLogik E1214-T

Ethernet remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays, -40 to 75°C
operating temperature

ioLogik E1240-T

Ethernet remote I/O with 2-port Ethernet switch and 8 AIs, -40 to 75°C operating
temperature

ioLogik E1241-T

Ethernet remote I/O with 2-port Ethernet switch and 4 AOs , -40 to 75°C operating
temperature

ioLogik E1242-T

Ethernet remote I/O with 2-port Ethernet switch, 4 AIs, 4 DIs, and 4 DIOs, -40 to 75°C
operating temperature

ioLogik E1260-T

Ethernet remote I/O with 2-port Ethernet switch and 6 RTDs, -40 to 75°C operating
temperature

ioLogik E1262-T

Ethernet remote I/O with 2-port Ethernet switch and 8 TCs, -40 to 75°C operating
temperature

Product Features

•

Built-in 2-port Ethernet switch for daisy-chain topologies.

•

Free support of Moxa’s push-based Active OPC Server Lite.



Seamlessly connect to any SCADA system



Save 80% on network bandwidth



I/O response that’s seven times faster

•

User-defined Modbus/TCP addressing

•

MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs

•

Web configuration with Import/Export function

•

Peer-to-peer transmission of I/O signals over Ethernet without controller

Inside the Box

The ioLogik E1200 is shipped with the following items:

•

ioLogik E1200 Remote Ethernet I/O Server.

•

Document and Software CD.

•

Quick Installation Guide.

NOTE: Notify your sales representative if any of the above items are missing or damaged.

Summary of Contents for ioLogik E1200 Series





































































Search results

Summary of Contents for ioLogik E1200 Series

Reviews:

Moxa Technologies ioLogik E1200 Series, User Manual, Page: 6 / 69

Search results

Summary of Contents for ioLogik E1200 Series

Reviews: