6/60
ST_PM_ Installation Manual_EN_V1.0 | 08.2020
Copyright © 2020 Mounting Systems GmbH
2.4.1
Disclaimer
No liability or responsibility will be accepted in respect of any loss or damage resulting
from any failure to comply with the safety-related provisions set out in these instructions.
No responsibility will be accepted for the infringement of other third-party rights that
result from the use of this product.
The operator has the sole responsibility for protecting the power plant system against
access by third parties or taking additional measures to this end if required. The
manufacturer reserves the right to make changes to the technical data of this product or
these instructions without prior announcement or notification provided that such changes
do not relate to safety regulations or CE conformity.
It is prohibited to make changes to the photovoltaic system. Any misuse will result in the
cancellation of the warranty, guarantee and any liability on the part of the manufacturer.
This also includes modifications to factory-set parameters of system parts.
2.4.2
Guarantee
The product guarantee applies in accordance with the current warranty agreements, the
general terms and conditions of business and the additional contractual provisions
concluded with the supplier.
2.4.3
Warranty
The legal framework conditions of the country of manufacture apply. Any further-
reaching agreements must be set out contractually with the manufacturer prior to the
awarding of the order.
2.4.4
Copyright and trademarks
All specifications made in this documentation are confidential and are subject to
copyright law. This documentation must not be supplied to third parties without the
manufacturer's approval.
“Mounting Systems” is a registered trademark of Mounting Systems GmbH. Safety
requirements. The operator must ensure that each person instructed to carry out
installation work can show evidence that they have received appropriate professional
training.
This document is confidential and only for the information for the intended recipient and
may be not used, published or redistributed without the prior written consent of Mounting
Systems GmbH.
