20/60
ST_PM_ Installation Manual_EN_V1.0 | 08.2020
Copyright © 2020 Mounting Systems GmbH
6.4.3
Install rafter
Please note the orientation of the rafter. The holes (6) in the rafter must be on the same
side as the connecting parts (7) on the post Extension (5).
Insert the two "ZFM-3034-06-VS" plastic plain bearings (1) into the rafter bracket (2).
Lift the rafter (3) over the rafter bracket (2) and attach it using the bolt (4).
Figure 8 Rafter installation
Secure the bolt with the retaining rings and carefully lower the rafter on the west side.
Check the placement of the "ZFM-3034-06-VS" plastic plain bearings.
The bearing should not be pushed out of the rafter bracket when the bolt is
inserted.
