16/60
ST_PM_ Installation Manual_EN_V1.0 | 08.2020
Copyright © 2020 Mounting Systems GmbH
Once the support posts have been placed, the pile heads should be treated with
zinc dust primer. This prevents premature corrosion and thus increases the
longevity of the system.
6.3
Post extensions and motor mount
The post extensions are pre-assembled with all connections and bearing parts.
6.3.1
Tools and equipment
•
Cordless screwdriver with adjustable torque or torque wrench (M12)
•
Tape measure, guideline or laser level
•
Spirit level, angle meter with spirit level
•
Assembly jig for motor mount
6.3.2
Work steps
Check all parts for completeness and damage. Do not use damaged parts.
Pre-assembled post extension
Weight approx. 15 kg
(The 2 "ZFM-3034-06-VS" plastic plain bearings on the upper
connector are either secured against falling out or are
delivered separately in boxes.)
Motor mount
Weight approx. 2.8 kg
Assembly jig
Weight approx. 1.3 kg
