6 Wiring of the Device
54
Rev. 09/2019
Connection on the Ignition Controller
Wiring of the RS485 interface
Follow these instructions for the RS485 interface wiring:
–
Max. 32 devices can be connected to a bus.
–
The maximum wire length is 100 m (328') depending on the transfer
rate.
–
Each bus end must be fitted with a terminating resistor with 120 Ω in
each pair of leads (as indicated in the drawing).
Summary of Contents for MIC-Marine
Page 1: ...MIC6 Ignition Controller Operating Manual P N 01 10 026 EN Rev 09 2019...
Page 175: ...Rev 09 2019 175...
Page 176: ......
