List of Tables
– continued
DRAFT
SC
300 1X BTS Hardware Installation, ATP, and FRU Procedures
JAN 2002
xiv
Table 7-10: Procedure to Verify and Change BTS Sync Mode
7-27
. . . . . . . . . . . . .
Table 7-11: Procedure to Verify DPLL Tracking
7-28
. . . . . . . . . . . . . . . . . . . . . . . .
Table 7-12: Procedure to Verify Default Startup Coordinates
7-29
. . . . . . . . . . . . . .
Table 7-13: Procedure to Set Frame ID for
Multi–Unit Logical BTS Configuration
7-31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-14: Procedure to Create Site–Specific BTS Directory
7-32
. . . . . . . . . . . . .
Table 7-15: Procedure to Start the LMF and Login to the BTS
7-33
. . . . . . . . . . . .
Table 7-16: Procedure to Update BTS–Specific CDF File Device Load Version
7-33
Table 7-17: Procedure to Download/Enable MAWI
7-34
. . . . . . . . . . . . . . . . . . . . . .
Table 7-18: System Status LED States
7-36
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-19: Procedure to Verify and Set Span Line Settings
7-37
. . . . . . . . . . . . . . .
Table 7-20: SPAN_CONFIG Command Parameters
7-39
. . . . . . . . . . . . . . . . . . . . .
Table 7-21: Verify and/or Change Gigatronics 8541C Power Meter GPIB
Address
7-40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-22: Verify and/or Change Motorola CyberTest GPIB Address
7-41
. . . . . . .
Table 7-23: Verify and/or Change HP8935 GPIB Address
7-42
. . . . . . . . . . . . . . . .
Table 7-24: Verify and/or Change HP8921A and HP83236A GPIB Addresses
7-43
Table 7-25: Verify and/or Change Advantest R3465 GPIB Address
7-44
. . . . . . . . .
Table 7-26: Verify and Change Advantest R3267 GPIB Address
7-45
. . . . . . . . . . .
Table 7-27: Verify and Change Agilent E4406A GPIB Address
7-47
. . . . . . . . . . . .
Table 7-28: Verify and Change Agilent E4432B GPIB Address
7-49
. . . . . . . . . . . .
Table 7-29: Procedure to Calibrate Test Equipment
7-52
. . . . . . . . . . . . . . . . . . . . . .
Table 7-30: Procedure to Calibrate R3465
7-53
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-31: Procedure to Calibrate R3267
7-53
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-32: Perform Agilent E4406A Self–alignment (Calibration)
7-54
. . . . . . . . .
Table 7-33: Procedure to Setup Advantest R3465 Test Equipment
7-55
. . . . . . . . .
Table 7-34: Procedure to Setup Advantest R3267 Test Equipment
7-56
. . . . . . . . .
Table 7-35: Procedure to Select Test Equipment
7-57
. . . . . . . . . . . . . . . . . . . . . . . .
Table 7-36: Procedure to Manually Select Test Equipment in a
Serial Connection Tab
7-58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-37: Procedure to Select Test Equipment Using Auto-Detect
7-59
. . . . . . . .
Table 7-38: Procedure to Calibrate the Power Meter
7-60
. . . . . . . . . . . . . . . . . . . . .
Table 7-39: Automated Cable Calibration
7-62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-40: Procedure to Create a CAL File
7-66
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 7-41: Procedure to Test and Verify the Subscriber Unit
7-69
. . . . . . . . . . . . . .
Table 7-42: Procedure to Program the SU NAM Parameters
7-71
. . . . . . . . . . . . . . .
Table 7-43: 1900 MHz TX and RX Frequency vs. Channel
7-74
. . . . . . . . . . . . . . .
Table 7-44: 800 MHz TX and RX Frequency vs. Channel
7-76
. . . . . . . . . . . . . . . .
