Motorola SB1, Integrator Manual

Page: 89 / 136

CHAPTER 5 MAINTENANCE AND
TROUBLESHOOTING
Introduction
This chapter includes instructions on cleaning and storing the SB1, and provides troubleshooting solutions for
potential problems during SB1 operation.
Maintaining the SB1
For trouble-free service, observe the following tips when using the SB1:
•
Do not scratch the screen of the SB1. When working with the SB1, use only your finger. Never use an
actual pen, pencil, stylus or other sharp object on the surface of the SB1 screen.
•
Although the SB1 is water and dust resistant, do not expose it to rain or moisture for an extended period
of time. In general, treat the SB1 as a pocket calculator or other small electronic instrument.
•
The screen of the SB1 is glass. Do not to drop the SB1 or subject it to strong impact.
•
Protect the SB1 from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and
keep it away from heat sources.
•
Do not store or use the SB1 in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the SB1. If the surface of the SB1 screen becomes soiled, clean it with a
soft cloth moistened with a diluted window-cleaning solution. See
Cleaning on page 5-2
.
•
Do not place in pocket. Use holster or armband.
Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
WARNING
!
Failure to follow these guidelines may result in fire, explosion, or other hazard
.