Motorola SB1 Integrator Manual Download Page 52

Page: 52 / 136

3 - 16 SB1 Integrator Guide

Quick Options

Use the

Quick Options

to reset the WLAN radio to the factory defaults and to remove profiles from the list.

Factory Defaults

To reset the WLAN settings:

Touch

Quick Options

. The

Quick Options

window appears.

Figure 3-26

Quick Options Window

Touch

Reset WLAN to Factory Defaults

Figure 3-27

Confirmation Dialog Box

Touch

to restore factory defaults or

Cancel

to go back to the

Quick Options

screen.

Remove 101 WLAN Profile

To remove the default 101 WLAN Profile:

Touch

Quick Options

. The

Quick Options

window appears.

Table 3-7

Current Profile Window

Icon

Description

The AP is the associated access point.

The mobile computer is not associated to this AP.

Summary of Contents for SB1









































































































































Search results

Summary of Contents for SB1

Reviews:

Related manuals for SB1

Brands by name

Popular brands

Motorola SB1, Integrator Manual

Search results

Summary of Contents for SB1

Reviews:

Related manuals for SB1

Brands by name

Popular brands