Motorola MVME2603-1121A, Installation And Use Manual

Page: 155 / 210

CNFG and ENV Commands
6-7
6
Auto Boot Scan Enable [Y/N] = Y?
Auto Boot Scan Device Type List = FDISK/CDROM/TAPE/HDISK?
This is the listing of boot devices displayed if the Autoboot Scan
option is enabled. If you modify the list, follow the format
shown above (uppercase letters, using forward slash as
separator).
Auto Boot Controller LUN = 00?
Refer to the PPCBug Firmware Package User's Manual for a listing
of disk/tape controller modules currently supported by
PPCBug. (Default = $00)
Auto Boot Device LUN = 00?
Refer to the PPCBug Firmware Package User's Manual for a listing
of disk/tape devices currently supported by PPCBug.
(Default = $00)
Auto Boot Partition Number = 00?
Which disk ÒpartitionÓ is to be booted, as speciÞed in the
PowerPC Reference Platform (PRP) speciÞcation. If set to zero,
the Þrmware will search the partitions in order (1, 2, 3, 4) until
it Þnds the Þrst ÒbootableÓ partition. That is then the partition
that will be booted. Other acceptable values are 1, 2, 3, or 4. In
these four cases, the partition speciÞed will be booted without
searching.
Y
If Autoboot is enabled, the Autoboot process
attempts to boot from devices speciÞed in the
scan list (e.g.,
FDISK/CDROM/TAPE/HDISK
).
(Default)
N
If Autoboot is enabled, the Autoboot process
uses the Controller LUN and Device LUN to
boot.