Motorola MVME162P-242, Installation And Use Manual

Page: 81 / 134

ENV - Set Environment
http://www.motorola.com/computer/literature 3-21
3
IP D/C/B/A Interrupt 1 Control = 00000000?
Define the interrupt control requirements for the IP modules, channel 1:
!
Caution
If you have specified environmental parameters that will cause an overlap
condition, a warning message will appear before the environmental
parameters are saved in NVRAM. The important information about each
configurable element in the memory map is displayed, showing where any
overlap conditions exist. This allows you to quickly identify and correct an
undesirable configuration before it is saved.
If an undesirable configuration already exists, you may wish to restore the
factory defaults with env;d <CR>.
ENV warning example:
WARNING: Memory MAP Overlap Condition Exists
S-Address E-Address Enable Overlap M-Type Memory-MAP-Name
$00000000 $FFFFFFFF Yes Yes Master Local Memory (Dynamic RAM)
$FFE00000 $FFE7FFFF Yes Yes Master Static RAM
$01000000 $EFFFFFFF Yes Yes Master VMEbus Master #1
$00000000 $00000000 No No Master VMEbus Master #2
$00000000 $00FFFFFF Yes Yes Master VMEbus Master #3
$00000000 $00000000 No No Master VMEbus Master #4
$F0000000 $FF7FFFFF Yes Yes Master VMEbus F Pages (A24/A32)
$FFFF0000 $FFFFFFFF Yes Yes Master VMEbus Short I/O (A16)
$FF800000 $FFBFFFFF Yes Yes Master Flash/PROM
$FFF00000 $FFFEFFFF Yes Yes Master Local I/O
$00000000 $00000000 No No Master Industry Pack A
$00000000 $00000000 No No Master Industry Pack B
$00000000 $00000000 No No Master Industry Pack C
Bits IP Register Address
31-24 D FFFBC017
23-16 C FFFBC015
15-08 B FFFBC013
07-00 A FFFBC011